Hardware Device Error Login to Neo App and Try Again

Pro Tools Error Codes - What They Mean And How To Fix Them

In this commodity, we take a comprehensive look at the error codes that Pro Tools tin throw up when y'all are least expecting them. We look at each bulletin, explain what is going on and offering advice on how to resolve the trouble.

DAE Or AAE?

DAE stands for Digital Audio Engine on older versions of Pro Tools and AAE is short for Avid Audio Engine which replaced the DAE from Pro Tools 11. And then for the rest of this article, we volition refer to the errors equally AAE Errors.

AAE Error 2

AAE Error 2 is probable to come up when you press Play in Pro Tools.

You volition get this mistake if there are 2 or more hard drives that are labelled with the same name. It doesn't matter whether they are internal or external drives that are continued to the reckoner, if you accept 2 drives of the aforementioned name, Pro Tools cannot tell which drive is which.

The solution is to rename at least be of the drives so that they take different names.

AAE Mistake -13

An AAE Error -13 can popular upward when you click on a track, in the timeline, in the clip listing, or when making a track active or inactive. This is ordinarily a permissions issue. When clicking on a runway or in the clip listing you may not accept the appropriate permissions for one of the files you are effectively trying to admission or you may not take permission to access the binder the file(south) are in.

The communication is to check the full file path of your sound and video files to make sure they reside in the correct location and to make sure you lot have the necessary permissions to access the folder, especially if it is on a network-attached drive or on a drive that isn't yours.

AAE Error -35

Along similar lines, as AAE Error 2, in that location is AAE Error -35. This usually pops upwards when launching or opening a session with Pro Tools on a macOS Pro Tools organization.

Information technology can be the same outcome as Error two in that y'all could take 2 drives with the same proper noun, but AAE Error -35 is more likely to occur because ane of your drives has one or more macOS illegal characters in the name.

Illegal characters are * | " : < > ? / \

These should not be used in session or project names or media names. Apparently, they may exist used when naming playlists but exist aware that they will be replaced past an underscore (_) if they make their mode to an audio file name via recording, bouncing, consolidating, etc.

Every bit a upshot, it is recommended that yous try and avoid using these characters when naming sessions and playlists in Pro Tools.

Too, avert using these illegal characters in external hard drives and networked book names, naming drives and folders as well as using forward / and back \ slashes and connecting external drives sharing the same exact name.

Nosotros did detect that you lot can utilize Emojis and Symbols. For more details check out our article You Can Use Emojis And Symbols In Pro Tools Sessions - Hither's How. However, note that nosotros did add a caveat regarding illegal characters.

Basically the safest thing to practise is non to utilise * | " : < > ? / \ when naming anything!

AAE Error -55

AAE Error 55 tin pop upwardly when launching Pro Tools. It would announced that the principal reason for an AAE Erro -55, is an incompatible plugin. The question is which one.

Note that an incompatible plugin tin cause problems only existence in your plugins folder, it doesn't have to exist used in the session, only being in the plugin folder is enough to be a problem.

There is no shortcut to figuring out which plug-in may be crashing your organization, this is how yous do it.

Create a folder on your desktop (or somewhere safety) and and then drag all the plug-ins from your plug-ins folder to the new folder for safe-keeping.
Split your plug-ins into two groups. Elevate i half of that group back to your plug-in folder and see if your system launches
If it does, and so pull them dorsum out and attempt the other half - it should crash.
If it does, and then separate the remaining grouping in one-half over again and repeat the process until y'all find the culprit.

I am reliably informed, but not smart enough to practise the maths, that irrespective of the number of plug-ins y'all have, that you should discover the culprit in around eight moves - not of course accounting for those with low plug-in counts. I'm smart plenty to realise that if you take vii plug-ins then you lot can do it in less than viii moves.

One time you have identified the culprit then get and get the latest version and install it and all should be good.

AAE Errors 1174, 1177, 1178 and 1179

We have grouped these three error letters together as they all relate to Pro Tools HDX cards.

AAE Mistake -1174 can pop up when you are using an HDX card in an expansion chassis. The advice is every bit follows…

Shut down the computer and power cycle the chassis (if applicable). Zap PRAM when restarting the computer. Launch Pro Tools. If the mistake persists, run the DigiTest utility to verify if in that location are any failures. If there are failures, endeavor moving the HDX card to some other PCIe slot and run the utility again.

AAE Mistake -1177 will pop upward if you do not have an audio interface continued to an HDX card when you launch Pro Tools. The advice is to ensure that your interfaces are powered on and that all DigiLink cables are secured on both ends.

AAE Errors 1178 and 1179 are warnings that one of your HDX cards is overheating With an AAE Fault -1178, this is a alert that the HDX carte fan is not spinning. The advice is to ensure your HDX card(s) have been connected to the internal power of your calculator or chassis, and that the fans are working properly. One of the virtually common reasons for an HDX card fan not to be spinning is that a neighbouring card isn't properly located and the bill of fare is preventing the HDX card from spinning.

AAE Error 1179 is a more than full general overheating warning bulletin showing that your HDX cards are operating at temperatures above their intended threshold. The advice is to ensure that the fans on the HDX cards are functional, and that the airflow in the computer or chassis in which they are installed is not compromised, past checking for excessive dust in exhaust ports or nonfunctional fans. If your computer or chassis is installed in a quiet rack or isolation studio piece of furniture, ensure that the operating temperature inside is less than 100 degrees Fahrenheit.

AAE Mistake -1180

AAE Error -1180 tin can pop up if your Pro Tools computer is prepare to enter Sleep or Hide mode. The advice is to disable Slumber and Hibernate.

AAE Errors -6101 and -6106

In researching the 6106 fault in Pro Tools 12, it led us to a family unit of Pro Tools errors that relate to the H/W buffer size in Pro Tools. These include Pro Tools errors -6086, -6085, -6031, -6080, -6093, -6097 and -6101 with error letters like these...

The operating system held off interrupts for likewise long. If this occurs frequently, reduce the number of plug-ins or increase H/W Buffer in the Playback Engine Dialog. (-6086)
The audio device buffer underflowed. If this occurs oftentimes, effort decreasing the "H/W Buffer Size" in the Playback Engine Dialog (6085).
You lot are running out of CPU power. Remove some RTAS plug-ins or increase the CPU Usage Limit in the Playback Engine dialog (-9128).

The Hardware Buffer Size (H/West Buffer Size) controls the size of the buffer used to handle host processing tasks such equally Real-Time AudioSuite (RTAS) plug-ins. These messages will ordinarily just be displayed during playback or recording and will result in Playback or recording being stopped. These messages may occur for a diverseness of reasons:

RTAS Processing overload
Incompatible hardware
Interface communication issues
Wrong Organization Optimisation
Incompatible Plug-ins
RTAS Processing Overload

You may simply be running too many simultaneous RTAS plug-ins, so to rule this out showtime check your CPU (RTAS) meter in the Arrangement Usage window. But the trouble is much more likely to exist elsewhere in your organization. Then work your way through these suggestions to help resolve the problem.

Incompatible Hardware - Computer hardware that has not been specifically tested and canonical by Avid may contribute to buffer errors. The following are the most common system components to cause buffer errors if incompatible:

Motherboard Chipset (on Windows machines) - Firewire Controller (less likely on newer machines, simply if you are nonetheless using older FireWire peripherals this may notwithstanding exist an event).

Network Adapter
Integrated Graphics
Interface Advice Bug
A faulty firewire or USB cable may be the culprit. Some ports work better than others. Try all available USB and firewire ports.
Incorrect Organisation Optimisation

Plow off Wi-Fi - In their computer optimisation guides, Avid recommend that you turn off your Wi-Fi connection if your estimator is equipped with Bluetooth wireless and/or a Wi-Fi (AirPort) card, for Pro Tools to work correctly. In add-on to freeing upwards arrangement resource, disabling these can aid resolve DAE errors -6085, -6086 and -6101.

Incompatible Plug-ins - Sometimes having incompatible plug-ins installed can degrade system functioning and contribute to buffering related errors. Check that you have the correct versions of all plug-ins for your version of Pro Tools.

AAE mistake -6101 in tape or playback at lowest buffer setting on Os X 10.eleven.x (El Capitan)

This is another known reason for Pro tools to throw up a 6101 error message, as it is a known outcome using Eleven Rack, Mbox 3, C400, or C600 on some older (USB2) Macs running Os Ten 10.xi.x (El Capitan). The initially recommended workaround is to increase the HW Buffer size. The better news is that Avid has reported that this was fixed in after versions of the drivers for these interfaces so make sure you have the latest driver installed. v1.2.9 of the drivers is listed as fixing this problem

Mbox Drivers
Eleven Rack Drivers
C400 Drivers
C600 Drivers

Pro Tools loses audio playback or an -6101 fault occurs when disconnected headphones on a MacBook Pro

This is another known example of where Pro tools can report a 6101 error. While playing back Pro Tools xi and listening to audio from the internal headphone output from a MacBook Pro reckoner, if the headphones are unplugged a 6101 error may occur. If the headphones are disconnected while Pro Tools is idle and not playing back, audio may no longer come out of the speakers on the MacBook Pro. To resolve this, either plug the headphones back in to continue monitoring audio, or restart Pro Tools to hear audio from the congenital-in speakers on the MacBook Pro.

–6101 fault when previewing audio with Pro Tools Aggregate I/O

When previewing audio in the Import Sound dialog with Pro Tools Aggregate I/O selected every bit the Current Engine (in the Playback Engine dialog), and with the Mac OS File view is set to Columns view, you lot may meet a –6101 error. Effort irresolute the Mac OS file view from Columns to Listing or Icons view, or utilize any of the built-in sound devices instead of Pro Tools Aggregate I/O to avert this problem

AAE Fault -6117

With Pro Tools Get-go, an AAE mistake -6117 means "Device is not nowadays" and is likely due to a missing commuter for your interface. This is likely to be on a Windows motorcar.

Download and install the driver for your sound interface (download drivers for Gorging interfaces)

If a driver is not available or using the built-in audio hardware on a PC, try installing ASIO4ALL. Cheque out our commodity on ASIO4ALL.
Hold the Northward key downwardly immediately afterward launching until the Playback Engine window opens to select your device

If the same error occurs, Gorging recommend you endeavour the post-obit...

Correct-click the Speaker Icon you lot can encounter on the lower right side of your screen. Then, click Playback Devices.
Correct-click the devices and disable all sound device.
Do the same in the Recording tab abreast Playback (on top of the dialogue box) Afterward all the Playback and Recording devices are disabled, endeavour to run Pro Tools First again. If it runs, y'all can enable all the sound devices again.

Although the -6117 mistake is most likely to happen in Pro Tools Kickoff, it can happen in other versions of Pro Tools when it cannot find an audio interface. I user with Pro Tools 12.6.ane reported that de-activating all audio devices (in devices panel of windows 8.1), then re-opening Pro Tools, information technology will work with the generic driver. Finally, re-activate the correct sound device and drivers and it worked fine.

Another user with an Apollo Quad interface on Windows x with Pro Tools 12.four reported that whenever they try to load upward Pro Tools they become the error: "The selected audio device could non exist initialized. Please cull some other audio device." When they hit "OK", they got: "AAE error -6117 was encountered". Their prepare was to go to Playback devices on the Windows toolbar and make sure the Apollo was enabled. Then go into Recording devices and make sure the Apollo was disabled. This caused Pro Tools to recognise the Apollo, and can withal play sound from iTunes/Spotify/etc.

AAE Error -7054

The most likely reason that an AAE Mistake -7054 would popular upwardly is that y'all have an out-of-date plugin in your plugin binder. More than specifically a 32-bit plugin in a 64bit version of Pro Tools. Prior to Pro Tools 10 all plugins, likewise as Pro Tools, were 32-bit lawmaking. Pro Tools eleven was the first version of Pro Tools that was 64-fleck and then this error was very common in the early days of Pro Tools 11. Notwithstanding, it is possible to install an older 32-bit plugin and so trigger this error message.

The solution to a Pro Tools AAE Error -7054 bulletin, is to make sure yous take the latest version of all your plugins installed.

AAE Error -9013

This is a weird i as the suggestion in the fault message is completely misleading. Pro Tools reports "AAE's memory is running low. Please effort to increase AAE's Preferred Size. (AAE -9013)", or information technology might merely written report "AAE -9013 is encountered".

Either way, what this may actually mean is that Pro Tools is looking for a missing file or bulldoze, which might occur if the session'due south storage device becomes unmounted.

The advice is that you ensure the session's storage volume is withal bachelor, and and then quit and relaunch Pro Tools. At that place is no way to conform AAE's preferred size. and so Avid shut by asking that nosotros "Please disregard that education"!

AAE Fault -9073

This is i of the most common Pro Tools errors and in essence, is Pro Tools maxim that it tin't go the data fast plenty.

There are usually ii main ways Pro Tools reports -9073 errors...

DAE can't become audio from the disk fast enough. Your disk may be too slow or too fragmented.
The PCI bus is too busy for DAE to communicate reliably with the sound hardware.' Mistake occurs during Bounce to Disk, playback or tape on Mac or Windows platforms. DAE (and more recently AAE) mistake -9073 "

The leading crusade of the -9073 mistake is recording, playing back, or bouncing to a drive that is literally "as well slow or besides fragmented". A lot of the advice relates to older computer systems with Firewire or USB drives etc.

In my experience 9073 errors come up up at the point Pro Tools cannot become all the information on and off the session drive fast plenty. That tin can be because the data is too fragmented, ie $.25 of the sound file are spread across the drive, but once again things take moved on so much that fragmentation isn't always the effect. Also, the reasons for -0973 error letters can be many and varied, but can include the fact that the computer is too busy to serve Pro Tools in a timely manner, which could be background applications running and and so on

The PCI Bus version "The PCI passenger vehicle is too decorated for DAE to communicate reliably with the sound hardware. Deejay besides deadening or too fragmented" is a variation on the aforementioned problem but in this case, information technology is the PCI autobus that is getting clogged upwards so that Pro tools tin't get the data fast enough.

Things To Try To Resolve -9073 Errors

Pro Tools HD users have had Disk Cache since Pro Tools 10, which enabled Pro Tools to load some, or all of the session and media into your RAM, making 9073 errors history. Disk Enshroud came to Pro Tools Vanilla in version 12.2, which makes the likelihood of getting 9073 errors on any Pro Tools organization later than v12.ii much less likely.

Even and so, it is still possible to get 9073 errors with Disk Cache. If playback is started while Disk Cache is in the process of filling, Pro Tools will stop playback with an AAE -9073 error. Avid recommends that you look until Disk Cache has finished caching the timeline to begin playback.

Check your Disk Cache settings. Some users have reported that if it is set to Normal Pro Tools can notwithstanding produce 9073 or 9173 errors. Increasing the Disk Enshroud to say 10GB (providing you accept the memory for it) may resolve the problem.

Look at any application that might be scanning drives creating catalogs etc, equally they will make the hard bulldoze have to piece of work harder.

Spotlight indexing has been plant to cause -9073 "disk too slow" errors while recording in Pro Tools. You can disable Spotlight indexing:

Open Os X System Preferences
Open the "Spotlight" Command Panel
Select the "Privacy" pane
Use the Add together button (the "+") or drag a binder or disks into the list

Audio tracks with lots of edits, as tin be created when using Beat Detective, can likewise cause -9073 errors. Bounce to disk, Consolidate, or using Rail Commit all can help.

Communication On 9073 Errors On Older Systems

If you accept a lot of tracks in a session then consider splitting your audio tracks upwardly across multiple drives to prevent this error.

Partition large drives into volumes no larger than effectually 9 gigs in size can help prevent fragmentation. But partitioning drives can also crusade bug and again this largely relates to older systems. Large drives now rarely need segmentation for functioning reasons.

Firewire drives have been known to cause 9073 errors. Avid recommends that all Firewire drives must have an RPM speed of 7,200 and accept the Oxford 911 Span chip.

AAE Fault -9118

AAE Fault 9118 is likely to popular up when yous are attempting to Destructively Punch into or process a file. It indicates that an attempt has been fabricated to write to the aforementioned file multiple times during processing.

The advice is if the error occurs repeatedly when attempting a detail operation, quit Pro Tools and reboot the computer. And then attempt again.

AAE Error -9171

This error ordinarily pops up when the hardware buffer size is too low and relates to other CPU Overload Errors at Low Buffer Sizes, simply the key consequence is low buffer sizes.

In the Pro Tools 12.5 notes Avid report "CPU performance degradation with lower buffer sizes (AAE error -9171) with HDX"

When using Pro Tools ten.2 on a Mac or Windows dual-processor organization and Host Processors in the Playback Engine is set to a number of cores that is equal to double the number of physical CPU cores, playback at the lowest available buffer sizes will throw upward CPU Overload errors.

For example, if you have a dual 6-core CPU with Hyperthreading enabled, Pro Tools will permit 24 Host Processors to exist used.

If y'all are using 32, 64, 128, or 256 sample H/W buffer sizes on a dual-processor system, then Avid recommend that you lot prepare Host Processors to the number of actual physical cores.

In the dual 6-core CPU example, the desired Host Processor setting to avoid errors strictly related to this bug would be 12.

This bug does not occur when the H/W buffer size goes to a higher place 256 but is seen most oftentimes at 32 and 64 sample buffer sizes. However, this bug is not known to occur on single CPU configurations.

A DAE -9171 fault tin can be encountered when recording large track counts at loftier sample rates and low buffer sizes with the Hard disk drive Native Thunderbolt interface, Pro Tools 10.three.2 or 10.iii.three and the 2011 MacBook Pro (non-Retina) computers with deejay enshroud enabled.

This is an issue specific to the 2011 (not-Retina) MacBook Pro computers (8,one 8,2 and eight,3).

Every bit a workaround, Avid recommend...

Utilise a unlike computer (Retina MacBook Pro computers do not see this error)
Turn Disk Enshroud off while recording at higher sample rates
Revert to Pro Tools 10.3 or 10.3.1
In some cases, raising the H/Due west Buffer size tin aid reduce the error.

AAE Fault -9173

This is another common error on Pro Tools that tin can occur in a wide range of circumstances. At that place are usually two main ways Pro Tools reports 9173 errors...

Pro Tools ran out of CPU ability. Try deactivating or removing Native plug-ins. (AAE error -9173)
Pro Tools xi.two-11.2.ii experiences an AAE -9173 during a real-time bounciness to disk.

Things To Try To Resolve -9173 Errors

Pro Tools ran out of CPU ability. Try deactivating or removing Native plug-ins. (AAE mistake -9173)

This tin occur if you are pushing the CPU too hard. Go to Window > System Usage and cheque the CPU usage meter. If the CPU meter is > fourscore% you should conciliate Native plug-ins to find the most CPU intensive 1. You can and so brand them inactivate and replace with a less CPU intensive plug-in or Bounce/Commit the processed audio to a new runway and brand the original rail inactivate.

Other things to check...

If using a Click Track in Pro Tools 12.five, try deleting the Click Track (Bounciness or Commit the track prior to deleting if needed). Avid report this problem was resolved in Pro Tools 12.half-dozen. The temporary workaround is to return the click using Commit or offline bounce and import after bounce deactivating the Click Track.
If this error is occurring with a real-time bounciness, try enabling the Offline option in the bounce dialog box or bounciness to a track, rather than employ Bounce To Disc.
With Pro Tools 11, attempt enabling Dynamic Plug-In Processing in the Playback Engine.
This mistake code tin can be caused by a plug-in. Rails downward and remove the offending plug-in and should exist skillful again. The troublesome plug-in doesn't take to exist in your session. Merely being in the Plug-ins Binder is enough.
Reports on the DUC recently propose that for Mac users to endeavor the Turbo Boost Switcher app. It seems to manage the sudden CPU spikes that can trigger -9173 errors.
Some Windows users have reported improvements when Hyperthreading is turned off, although it would seem this is much less helpful for Mac users.

Avid fifty-fifty went every bit far as to canvas Pro Tools users with a customer survey on 9173 errors particularly on Windows seven and 10 systems. There is a post on the Pro Tools Ideascale on this too.

Pro Tools 11.2-11.2.2 experience an AAE -9173 during a real-time bounce to deejay. Real-time bounciness to disk fails with an AAE -9173 error.

Avid reports that this was fixed in Pro Tools 11.3. But suggested workarounds for previous versions are...

Utilise the offline bounciness characteristic in Pro Tools 11
Apply a real-time bounce to track to print the mix

Check Your Plug-ins - 9173 errors can exist caused by having older plug-ins in your plug-ins folder. So check your plug-ins and brand sure that they are all upwards to appointment. Nosotros used to recommend PluginUpdate to assist with this process, but support for information technology has been discontinued and the database that supported information technology is no longer live, and so it has taken away the main functionality, so it's back to checking the latest version from each programmer's website 1 by one.

AAE Mistake -13001

This is a Windows-just mistake and seems to exist more common when trying to use Pro Tools First for the outset time.

If you get an AAE Error -13001 message then the advice is to correct-click on the Pro Tools icon and choose Run as administrator this gives yous the appropriate permissions to run Pro Tools.

AAE Mistake -14018

AAE Error -14018 is also plugin related. The most common reason for this error is that there is at to the lowest degree ane plugin in your plugin folder that has non been activated.

For example, we had a question back in Podcast 344 from Nov 2018 in which community fellow member Dave Wraight was experiencing AAE Fault -14018 with Realguitar and Realstrat plugins. Another user had reported having the same problem with these plugins and information technology turned out that the plugin was not registered…

"It wasn't until I tried to open the application outside of ProTools that the plugin told me it was Not yet registered. Must accept been running in demo mode up until I got the error. You get the license emailed to you lot from MusicLab when you purchase the plugin. You navigate to the license attachment in the email to register. Hey presto!... Solved!"

UAD Pro Tools Widows users can also feel AAE Mistake -14018. In the Univeral Sound UAD-2 DSP Accelerator Arrangement Setup and Configuration guide says…

"The Windows operating arrangement settings in this section are necessary to ensure optimum stability and performance with UAD-2 hardware.

To use Pro Tools xi or Pro Tools 12 with UAD AAX 64 plug-ins under Windows, the following steps are required. The process must exist performed each time an updated version of UAD software is installed (once for UAD v8.5, once for time to come UAD releases, etc).

If Pro Tools is not quit afterwards the initial plug-in browse, Pro Tools AAE error -14018, "Unable to locate hardware" and/or other anomalies may occur.

Note: These steps are not required when running Windows 10 May 2019 Update (version 1903) or college."

Another user reported that they got an AAE Error -14018 message because…

"For some reason, I forgot to conciliate the plugins on my last computer. In one case activated on my new Mac, it works fine now."

AAE Error -20007

An AAE Mistake 20007 tin pop upwardly when opening some sessions. Bizarrely, if the fault is dismissed, Pro Tools seems to function normally. This mistake can sometimes exist caused by a problem with the electric current I/O setup.

The advice is to balance the I/O Setup tabs to Default. To do this…

Open the Pro Tools session.

Click on the Setup menu.
Click on I/O.
In the Output tab. Click on the Default push towards the bottom left corner.
Click on the Input tab and then the Default button once more.
Click OK to save these changes.
Salvage, close, so reopen the session.

Assertion Errors

There are a group of error messages that can exist grouped under the banner of Assertion Errors.

They will throw upwards an error dialog box and have a message along the lines of…

Could not complete your request because Assertion in " ... xyz.cpp", line 123

The common elements are the word Assertion, a file name ending in .cpp and ending in a 3 digit line number.

The most mutual solution for these Assertion Errors, whether you are on macOS or Windows is to trash the Pro Tools Preferences.

You tin find out how to trash your Pro Tools Preferences either using a 3rd party app, exercise doing information technology manually in our commodity How Do I Trash My Pro Tools Preferences? Tutorial Covering Both Mac And Windows.

If that doesn't work and then for some of these Assertion Errors in that location are specific fixes.

Could not complete your request because Assertion in " ... CFicAAXWidget.cpp", line 822

This is an error that can pop up when the Pro Tools Playback Engine is not configured correctly and can occur in both Mac and Windows versions of Pro Tools.

There are three other options to prepare this which you can notice in this Avid Knowledge Base of operations Article.

"Could non complete your request because Assertion in "..\\BDM\BDM_Workspace.cpp" , line 1476

This is an oldie, but we include it here for abyss. This can pop up on older Windows Pro Tools Systems. The advice is to remove the CD/DVD disk from the optical drive or unplugging whatever external USB/Firewire/Thunderbolt storage devices.

Could not complete your request because Exclamation in "/Volumes/Development/158347/ProTools/App/AS/AS_PLayListCommandBase.cpp", line 1817 (occurs when processing X-Form)

Y'all might get this one popular up if you accept an old version of Avid'southward X-Form plugin installed, which is more mutual when processing longer clips and is fixed in X-Form v12.1. The advice here is to make sure you have the latest version of Ten-Form installed.

Terminate Of Stream Encountered

Have you lot ever got this error message "Terminate Of Stream Encountered" or "Could not complete Open up Session control considering of end of stream encountered" Nosotros heard about this 'gilt oldie' making a improvement.

In our article 'Stop Of Stream Encountered' Error Message In Pro Tools? - We Show 2 Means To Resolve This we cover 2 reasons why this error message could be popping up when y'all are trying to open up a session in Pro Tools, First, Pro Tools Standard or Pro Tools Ultimate.

The Error Bulletin You Are Looking For Is Non in This Article

The list in the commodity is comprehensive, only there are mistake messages that we have non covered. Most are mistake messages that occur on much older Pro Tools systems or take been fixed in subsequent versions.

Google is your friend here. Search for both the DAE error or AAE Error. Also, our advice is not to worry almost the minus sign at the start of the error number.

Don't look to notice the answer with the first click. As nosotros know in our inquiry, at that place are ofttimes different explanations for the various Pro Tools mistake numbers so dig a little farther, to get a consensus.

Mike Thornton has been involved in the circulate audio industry for all his working life, some 45 years. Mike has worked with Pro Tools since the mid-1990s recording, editing and mixing documentaries, one-act and drama for both radio and TV as well every bit doing the occasional music project. He was the co-founder of Pro Tools Expert and has now retired and has taken upward the role of Chairman of Production Expert Ltd.

stonegeorted.blogspot.com

Source: https://www.pro-tools-expert.com/home-page/more-pro-tools-error-codes-what-they-mean-and-how-to-fix-them